Sustainable Porous Paving

Permeable paving provides a stabilised pavement where surface water run-off can be reduced, managed, treated or attenuated near the surface to help reduce the risk of floods. Permeable paving systems are used extensively for car and coach parking, industrial yards, HGV and service access routes for fire / emergency, MEWP and utility vehicles where a sustainable urban drainage solution is required.

Typical applications

  • Grass car parks
  • Gravel car parks
  • Bus and coach parking
  • HGV & loading areas
  • Fire and emergency access roads
  • MEWP & service access routes
  • Cycle Routes and Paths
  • SuDS source control systems
  • Park & Ride schemes
  • Electric vehicle charging stations
  • Inland border facilities
  • Wind farms

Benefits

  • Management of stormwater
  • Reduces surface water run-off
  • Grass reinforcement & gravel retention
  • Permeable pavement surface
  • Protection from grass wear and rutting

ABG Geosynthetics are specialists in the design and supply of permeable paving surface solutions that provide ground reinforcement, stabilisation and permeability. Porous paving systems include interlocking plastic pavers, heavy-duty recycled paving grids and reinforced natural grass systems that are an alternative to impermeable hard paved surfaces which form part of a SuDS source control system.

Using a permeable pavement solves a number of problems associated with managing stormwater in a sustainable way. The hydraulic capacity of a porous pavement can accommodate rainfall landing directly on to it and also from adjacent surface catchments, including roofs.

ABG offer systems that can be used to create grass or gravel finishes for varying levels of traffic.
Gravel car parking using Sudspave porous paving grids
Sudspave can be used for traffic such as cars and vans, while Truckcell provides a solution for HGV and other heavy vehicles.
 
The design and specification of the individual components within a sustainable paving / permeable pavement solution is entirely project specific, but will typically comprise a porous surface laid over an open-graded, granular sub-base that satisfies the structural and hydraulic requirements of the project.

Permeable Gravel Surfaces

The combination of surface options facilitates an enhanced level of flexibility and choice in satisfying the aesthetic requirements of the project. Stabilised gravel can produce a much wider variety of different finishes to complement the development than a porous concrete system could offer. Porous plastic pavers enable a trafficable permeable surface and are used in the construction of gravel car parks, fire engine access roads, driveways, paths and access routes. Interlocking plastic porous paving grids provide ground stabilisation, retain gravel in-situ and can be used as part of a SuDS source control system.

Permeable plastic paving grids for porous car parking

Sudspave porous plastic pavers are ideal for gravel car parking, gravel driveways and paths where a heavy load-bearing stabilised permeable gravel surface is required. Sudspave retains the gravel within its cells and allows rainwater to permeate into the sub-base beneath.

Truckcell heavy-duty paving grids are a heavy load-bearing paving grid ideal for HGV access roads, lorry and truck routes, emergency fire access roads, bus and coach parks and loading areas.

Permeable Grass Surfaces

Reinforced grass surfaces to support car or pedestrian traffic need to protect the grass roots, provide ground stabilisation and be permeable.

Sudspave porous grass pavers are an open-cell interlocking plastic paving grid that allow optimum grass growth, are permeable and provide a structure-free natural grass surface. Using Sudspave grass pavers results in a natural grassed surface with high-loading bearing capabilities, stabilised ground and create a permeable SuDS compliant surface solution.

   

Truckcell paving grids are suitable where grass is required to be used occasionally by heavy vehicles, such as HGV trucks and lorries. Typically used for grass access roads to wind farms, power stations, grass lay-bys and fire access routes.
 
Where a fully green finish is required, our Advanced Turf System can be used to create a grass surface that drains quickly and provides the bearing capacity to deal with most occasional trafficking applications.

 

Advanced Turf strengthens the grass by protecting the roots and provides a free-draining, natural grass surface capable of pedestrian and vehicular traffic. The grass reinforcement mesh system provides a solution for trafficked grass paths, recreation areas, landscaped areas around office buildings, sports grounds and visitor attractions.

NOTE: ABG Ltd only supply the Advanced Turf System (ATS) in the UK and Ireland. Please contact Conwed/Mativ, Belgium for all other international enquiries: 

Typical Porous Paving Client Profile

  • Schools and Universities
  • Parish, town and district councils
  • Local authorities
  • National Trust & English Heritage properties
  • Visitor attractions and event venues
  • Music festival venues
  • Hospitals
  • Airport and railway parking
  • Industrial estates and business owners
  • Sports grounds and recreation parks
  • Parks and private estate owners

Design Services

Submit your project details via our Design Solutions form

Case studies

Additional information

Contact ABG for further information

Fill out our quick contact form with your product, application, technical or sales enquiry and one of our team will be in touch soon.

Contact